| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
| |
DB1260 Series |
Time Delay Setting: 0/3/6/10 Sec. |
Case 1-
Case 2-
Case 3-
Case 4-
Case 5-
Case 6- |
Power on the DB1260-PTO when door is close: Bolt will not retract if time delay setting is 0 second; Bolt will retract if time delay setting is 3/6/10 seconds, then after a time delay (3/6/10 sec), bolt will automatically extend. However, in these time delay periods, if door is opened and then closed again, bolt will extend right away.
Power on the DB1260-PTO when door is open: Bolt will retract, and extend right away if door is closed.
Power on the DB1260-PTL when door is close: After a time delay (0/3/6/10 sec), bolt will automatically extend. However, in these time delay periods, if door is opened and then closed again, bolt will extend right away.
Power on the DB1260-PTL when door is open: Bolt will extend right away if door is closed.
Push the exit-switch when DB1260 is powered and bolt extends: Bolt will retract, and after a time delay (3/6/10 sec), bolt will automatically extend. However, in these time delay periods, if door is opened and then closed again, bolt will extend right away.
Push the exit-switch when DB1260 is powered and door is open: Bolt will extend right away if door is closed. |
B Setting:
Case 1-
Case 2-
Case 3-
Case 4-
Case 5-
Case 6-
|
Power on the DB1260-PTO when door is close: Bolt will not retract if time delay setting is 0 second; Bolt will retract if time delay setting is 3/6/10 seconds, then after a time delay (3/6/10 sec), bolt will automatically extend. However, in these time delay periods, if door is opened and then closed again, the time delay will reset and count again.
Power on the DB1260-PTO when door is open: Bolt will retract. If door is closed, after a time delay (0/3/6/10 sec), bolt will automatically extend. However, in these time delay periods, if door is opened and then closed again, the time delay will reset and count again.
Power on the DB1260-PTL when door is close: After a time delay (0/3/6/10 sec), bolt will automatically extend. However, in these time delay periods, if door is opened and then closed again, the time delay will reset and count again.
Power on the DB1260-PTL when door is open: if door is closed, after a time delay (0/3/6/10 sec), bolt will automatically extend. However, in these time delay periods, if door is opened and then closed again, the time delay will reset and count again.
Push the exit-switch when DB1260 is powered and bolt extends: Bolt will retract, and after a time delay (3/6/10 sec), bolt will automatically extend. However, in these time delay periods, if door is opened and then closed again, the time delay will reset and count again.
Push the exit-switch when DB1260 is powered and door is open: if door is closed, after a time delay (0/3/6/10 sec), bolt will automatically extend. However, in these time delay periods, if door is opened and then closed again, the time delay will reset and count again. |
If bolt is out and not in the right position, after 6 seconds, bolt will automatically retract. Later, bolt will extend right away if door is opened and then closed again.
If bolt is out and not in the right position, in 6 seconds, bolt will automatically retract if door is opened. Later, bolt will extend right away if door is closed again.
Note: 1. When power is on and door is close, system will automatically set 3 seconds time delay once the exit-switch is
pushed to close momentarily and if the Time Delay Setting is set to 0 second.
2. The bolt will retract when the exit-switch (Brown Wire & Yellow Wire) is pushed to close momentarily.
The bolt will remain retract ( For example: during business hours) as long as these two wires are closed.
Bi-color LED Status (E Option): Buzzer Status (T Option):
1. Extend Successfully: Green blinks every 5 seconds. 1. Extend Successfully: Beep! Beep!.
2. Wait for Extend: Red blinks fast. 2. Extend Fail: Beep! … Beep! 10 seconds.
3. Delay Period: Red blinks slowly. 3. Retract Successfully: Beep!.
4. Wait for Delay Start: Red on. (B Setting only) Note: Set DIP4 ON/OFF to set Buzzer ON/OFF.
5. Bolt Remain Retract: Red/Green blinks alternatively.
V1.1
V1.2 2008
 |
| |
| |
DB1260 Series |
Case 1-
Case 2-
Case 3-
Case 4-
Case 5-
Case 6- |
Power on the DB1260-PTO when door is close: Bolt will not retract if time delay setting is 0 second; Bolt will retract if time delay setting is 3/6/10 seconds, then after a time delay (3/6/10 sec), bolt will automatically extend. However, in these time delay periods, if door is opened and then closed again, bolt will extend right away.
Power on the DB1260-PTO when door is open: Bolt will retract, and extend right away if door is closed.
Power on the DB1260-PTL when door is close: After a time delay (0/3/6/10 sec), bolt will automatically extend. However, in these time delay periods, if door is opened and then closed again, bolt will extend right away.
Power on the DB1260-PTL when door is open: Bolt will extend right away if door is closed.
Push the exit-switch when DB1260 is powered and bolt extends: Bolt will retract, and after a time delay (3/6/10 sec), bolt will automatically extend. However, in these time delay periods, if door is opened and then closed again, bolt will extend right away.
Push the exit-switch when DB1260 is powered and door is open: Bolt will extend right away if door is closed. |
B Setting:
Case 1-
Case 2-
Case 3-
Case 4-
Case 5-
Case 6-
|
Power on the DB1260-PTO when door is close: Bolt will not retract if time delay setting is 0 second; Bolt will retract if time delay setting is 3/6/10 seconds, then after a time delay (3/6/10 sec), bolt will automatically extend. However, in these time delay periods, if door is opened and then closed again, the time delay will reset and count again.
Power on the DB1260-PTO when door is open: Bolt will retract. If door is closed, after a time delay (0/3/6/10 sec), bolt will automatically extend. However, in these time delay periods, if door is opened and then closed again, the time delay will reset and count again.
Power on the DB1260-PTL when door is close: After a time delay (0/3/6/10 sec), bolt will automatically extend. However, in these time delay periods, if door is opened and then closed again, the time delay will reset and count again.
Power on the DB1260-PTL when door is open: if door is closed, after a time delay (0/3/6/10 sec), bolt will automatically extend. However, in these time delay periods, if door is opened and then closed again, the time delay will reset and count again.
Push the exit-switch when DB1260 is powered and bolt extends: Bolt will retract, and after a time delay (3/6/10 sec), bolt will automatically extend. However, in these time delay periods, if door is opened and then closed again, the time delay will reset and count again.
Push the exit-switch when DB1260 is powered and door is open: if door is closed, after a time delay (0/3/6/10 sec), bolt will automatically extend. However, in these time delay periods, if door is opened and then closed again, the time delay will reset and count again. |
If bolt is out and not in the right position, after 6 seconds, bolt will automatically retract. Later, bolt will extend right away if door is opened and then closed again.
If bolt is out and not in the right position, in 6 seconds, bolt will automatically retract if door is opened. Later, bolt will extend right away if door is closed again.
Note: 1. When power is on and door is close, system will automatically set 3 seconds time delay once the exit-switch is
pushed to close momentarily and if the Time Delay Setting is set to 0 second.
2. The bolt will retract when the exit-switch (Brown Wire & Yellow Wire) is pushed to close momentarily.
The bolt will remain retract ( For example: during business hours) as long as these two wires are closed.
Bi-color LED Status (E Option): Buzzer Status (T Option):
1. Extend Successfully: Green blinks every 5 seconds. 1. Extend Successfully: Beep! Beep!.
2. Wait for Extend: Red blinks fast. 2. Extend Fail: Beep! … Beep! 10 seconds.
3. Delay Period: Red blinks slowly. 3. Retract Successfully: Beep!.
4. Wait for Delay Start: Red on. (B Setting only) Note: Set DIP4 ON/OFF to set Buzzer ON/OFF.
5. Bolt Remain Retract: Red/Green blinks alternatively.
V1.1
V1.2 2008
 V 1.0 2007 |
|
| |
|
